Ubiquiti UniFi UPS Tower Managed 1kVA Uninterruptible Power Supply With 10 Outlets and Hot Swappable Battery

Ubiquiti UniFi UPS Tower, UniFi managed 1kVA uninterruptible power supply with 5 backup outlets 5 surge outlets and hot swappable battery, 108Wh, half load (300W) runtime of 7 minutes Ubiquiti UniFi UPS Tower (EU Model), UniFi managed 1kVA uninterruptible power supply with 5 backup outlets 5 surge outlets and hot swappable battery, 108Wh, half load (300W) runtime of 7 minutes.. Note.. Features Sleek UPS Tower offers reduced capacity in a compact form factor Seamlessly Integrate into the UniFi Network application for simple adoption and monitoring Built-in NUT server capability extending safe shutdown support to third-party servers as well (5) Battery backup/surge protection outlets: C13 (5) Additional surge protection outlets: C13 (2) GbE RJ45 surge protector, in/out Details Manufacturer's Code UPS-Tower-EU Dimensions 288 x 99 x 280.5 mm (11.3 x 3.9 x 11") Weight 7.85 kg (17.3 lb) Enclosure Material Polycarbonate and acrylonitrile butadiene styrene blend Form Factor Desktop Weatherproofing IP20 Management Ethernet Networking Interface (1) 100/10 MbE port for network connection, (2) GbE ports for surge in/out Power (1) OVC II AC in: C14 socket, 1.8 m (5.9 ft) removable power cord, (5) Battery backup/surge protection: C13, (5) Surge protection: C13 Capacity 1,000VA/600W Type Line interactive Input Voltage Range 170—280V AC Power Method (1) TN system, 220—240V AC, 6A Max., 50/60 Hz Nominal Input Voltage 230V AC Output Voltage 220—240V AC Nominal Output Voltage 230V AC Frequency Range AC mode: 50/60 Hz ±5 Hz (Auto sensing), Battery mode: 50 Hz ±1 Hz AC Voltage Regulation ±10% (Battery mode) Transfer Time 6 ms typical; 10 ms max. (Battery mode) Wave Form Simulated sine wave (Battery mode) Battery Type (1) Lead Acid 12V, 9Ah Runtime Full load: 2 min, Half load: 7 min Battery Charging Time 6-8 hours recovery to 90% capacity Overload at On-Line Mode 110% 5 min go to fault, 120% go to fault immediately Overload at Battery Mode 110% shutdown in 5 sec, 120% shutdown immediately Short Circuit Protection at On-Line Mode Breaker, 250V AC, 10A Output Short-Circuit Current Ipeak 401.9A, Irms 160.7A Buttons (1) Power, (1) Factory reset Status LEDs Off: device not turned on, Flashing white: initializing / factory default, Steady white: waiting for adoption, Steady blue: device adoption and working, Flashing blue: battery mode, Alternating white/blue: firmware upgrading, Rapid flashing blue: locate, Steady red: warning, Flashing red: low battery Battery Indicator LEDs All off: 0%, (1) Steady blue: battery 1—19%, (2) Steady blue: battery 20—39%, (3) Steady blue: battery 40—59%, (4) Steady blue: battery 60—79%, (5) Steady blue: battery 80—100% Operating Altitude 3,000 m (1.9 mi) Operating Environment Pollution Degree 2 Ambient Storage Temperature - Ambient Operating Temperature 0 to 40° C (32 to 104° F) Ambient Operating Humidity 0 to 95% noncondensing Certifications CE, IEC 62040-1 Manufacturer Website Firmware & Downloads Community Forum Help and Documentation Console Capacity Calculator Case Studies Blogs support Go Wireless Help Centre Solutions Details Power Cord (1) IEC Power Cord

Key features

• 20 to 50° C (-4 to 122° F)
• supports Graceful Shutdown for UNVR and UNAS, and includes NUT compatibility for third-party devices
• For Graceful Shutdown functionality, UniFi OS version 4.4.3 or higher is required