Ubiquiti UISP Wave Pro High-capacity 60 GHz radio for long-distance PtP Bridge and PtMP links with 5GHz Backup Radio

Ubiquiti UISP Wave Pro 2.7Gbps Full Duplex 60 GHz radio for long-distance PtP Bridge and PtMP links with 5GHz Backup Radio Ubiquiti UISP Wave Pro High-capacity 60 GHz radio for long-distance 2.7 Gbps Full Duplex, PtP Bridge and PtMP links with 5GHz Backup Radio. Features Max... throughput: 800 Mbps) (2) 2.5 GbE and (1) 10G SFP+ ports Ergonomic transportation handle Precision alignment mount Integrated GPS & Bluetooth Details Manufacturer's Code WAVE-Pro Operating frequency 57 to 71 GHz *Depends on regulatory region. Channel bandwidth 2160, 1080, 540 MHz Operating channels 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz *Depends on regulatory region. Modulation 16QAM, QPSK 60GHz Antenna gain 46 dBi Polarization Vertically linear Beamwidth Azimuth: 3 dB 1.3°, Elevation: 3 dB 1.3° Total throughput 5.4 Gbps (2.7 Gbps duplex) Max. range PtP: Up to 15 km, PtMP: Up to 8 km (Wave AP), up to 6 km (Wave AP Micro) Encryption WPA2-PSK (AES) Back-Up RF WiFi Standard 802.11ax (WiFi 6); Antenna gain: 22 dBi Operating mode PtP, PtMP station Ubiquiti specific features Integrated 60 GHz radio, discovery protocol, Wave technology Services UISP, ping watchdog, NTP client, SNMP Antenna alignment, discovery utility, ping, trace route, speed test, cable test, site survey Network Bridge/Router mode *Router mode is available in PtMP station mode only. Application requirements UISP: Version 2.3.0 and later Processor Quad-core ARM Cortex®-A53 at 1.4 GHz Memory DDR3L 512 MB Networking interface (2) 2.5 GbE RJ45 ports, (1) 10G SFP+ port Max. power consumption 26W Power method Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-), Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only Power supply 48V DC, 0.65A, 2.5 GbE PoE adapter (Included) supported voltage range 44–54V DC, 22–27V DC GPS Yes Button Factory reset LEDs Power, (2) Ethernet, SFP+, GPS, link Dimensions Ø424.4 x 166.2 mm (Ø16.7 x 6.5") Weight Without mount: 2.8 kg (6.2 lb), With mount: 4 kg (8.8 lb) Enclosure material Aluminum alloy, UV stabilized plastic Mount material Stainless steel Pole mount diameter 25 to 76.2 mm (1 to 3") on pipe outer diameter Wind loading 369 N at 200 km/h (83 lbf at 125 mph) Weatherproofing IPX6 Ambient operating temperature - Ambient operating humidity 5 to 95% noncondensing Certifications FCC, IC, CE Manufacturer Website Firmware & Downloads Community Forum Help and Documentation Console Capacity Calculator Case Studies Blogs support Go Wireless Help Centre Solutions Details Included 48V DC, 0.65A gigabit PoE adapter and Pole Mount Kit Key features 40 to 60° C (-40 to 140° F) link range: PtP: Up to 15 km, PtMP: Up to 8 km (Wave AP), up to 6 km (Wave AP Micro) Max throughput: 5.4 Gbps (2.7 Gbps duplex) 5 GHz weatherproof backup radio (Max