Ubiquiti UFiber GPON customer-premises equipment (CPE) with WiFi6

Ubiquiti UFiber GPON customer-premises equipment (CPE) with WiFi6 Ubiquiti UFiber GPON customer-premises equipment (CPE) with WiFi6... Features (1) GPON port Integrated 4-port GbE switch Integrated WiFi6 Details Manufacturer's Code UF-WIFI6-AU Processor Dual-core MIPS 1004 Kc at 900 MHz Memory 256 MB RAM Total non-blocking line rate 2.488 Gbps downstream, 1.244 Gbps upstream Networking interfaces (1) SC/APC, ITU-G.984 GPON WAN port, (4) GbE RJ45 LAN ports, WiFi 802.11ax 5/2.4 GHz channels PoE interface (1) PoE in, 24V passive PoE Management interface Ethernet in-band, PON Button Factory-reset Max. power consumption 11W Power method USB-C 5VDC, 3A (included), 24V passive PoE, 0.5A Power supply 5VDC, 3A power adapter, 1.5 m cord (included), Passive PoE 2-pair (4, 5+; 7, 8-) supported voltage range 10 to 30VDC passive PoE, 5VDC adapter Normal TX range of optical module 0.5 to 5 dBm Normal RX range of optical module - Max.. WiFi radio rate 2.4 Ghz - 300 Mbps, 5 Ghz - 1.2 Gbps Antenna Gain 2.4 GHz - 1dBi, 5 GHz - 3 dBi Wireless security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3, TKIP/AES) Operating wavelength 1310 nm TX/1490 nm RX Optical interface downstream nominal bit rate 2488.32 Mbit/s Optical interface upstream nominal bit rate 1244.16 Mbit/s Physical reach 20 km Operating temperature - Operating humidity 10 to 90% noncondensing Certifications FCC, IC, CE support Details Included Wall mount Kit, USB-C 5VDC, 3A Power Supply

Key features

• 8 to -28 dBm
• 15 to 45° C (5 to 113° F)
• Note: This device is only compatible with the UFiber OLT
• WiFi TX power 2.4 Ghz & 5 Ghz - 20 dBm MIMO 2.4 Ghz & 5 Ghz - 2 x 2 Max
• It cannot be used with third-party OLTs