1
/
of
1
Teltonika
Teltonika NTP001 NTP server
Teltonika NTP001 NTP server
SKU:NTP001
Regular price
$291.00 NZD
Regular price
Sale price
$291.00 NZD
Shipping calculated at checkout.
* All prices exclude GST & Freight, Calculated at checkout - supply only*
In stock
Quantity
Couldn't load pickup availability
Teltonika NTP001 Stratum-1 NTP server
Teltonika NTP001 NTP server
The NTP001 is a stratum-1 Teltonika NTP server designed for synchronizing accurate, UTC-traceable time in both public and private networks, without the need of Internet access. Utilising its GNSS capabilities, this low-cost NTP server maintains precise, UTC-traceable time. Plug-and-play functionality, a wide variety of interfaces including RS232 and RS485, and a robust security profile all make the NTP001 the perfect NTP server for your network.
The NTP001 is a stratum-1 Teltonika NTP server designed for synchronizing accurate, UTC-traceable time in both public and private networks, without the need of Internet access. Utilising its GNSS capabilities, this low-cost NTP server maintains precise, UTC-traceable time. Plug-and-play functionality, a wide variety of interfaces including RS232 and RS485, and a robust security profile all make the NTP001 the perfect NTP server for your network.
Features
- Accurate & low-cost NTP server
- Multiple Interfaces featuring RJ45, RS232, RS485 & I/Os
- PLUG-AND-PLAY Simple installation & configuration at minimum effort
| Details | |
|---|---|
| Product code | NTP001 |
| supported modes | Server - Receive time from GPS and act as a NTP server to broadcast time for other devices (Stratum 1). Broadcast time through UDP or over Serial (RS232, RS485) |
| Daytime Protocol | TCP/UDP |
| Date over Serial | RS232/RS485 |
| NTP | NTPv4, NTP authentication (MD5/SHA1), Unicast/Multicast/Broadcast mode |
| Protocol | NTP Stratum 1 Time Server (NTPv4) |
| NTP Accuracy | Ethernet NTP ±1ms overall |
| NTP Performance | >300 NTP requests per second (wire speed) |
| Synchronization Accuracy | LAN synchronization typically 1–10ms |
| Acquisition Sensitivity | Acquisition Sensitivity -146 dBm, Reacquisition Sensitivity -157 dBm, Tracking Sensitivity -157 dBm |
| Time Source | GPS 1575.42 ±1.023 MHz, GLONASS 1597.5–1605.8 MHz, Galileo 1575.42 ±2.046 MHz, BDS 1561.098 ±2.046 MHz |
| Startup | Cold GPS acquisition in <120 seconds |
| CPU | Mediatek, 580 MHz, MIPS 24KEc |
| RAM | 128 MB, DDR2 |
| FLASH storage | 16 MB, NOR Flash |
| LAN | 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL/TLS, ARP, SSH, DHCP, SNMP, MQTT |
| Connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot |
| Network topology | Visual representation of your network, showing which devices are connected to which other devices |
| Authentication | Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator |
| WEB filter | Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only |
| Access control | Flexible access control of SSH, Web interface, CLI and Telnet |
| 802.1x | Port-based network access control client |
| MODBUS supported modes | Server, Client |
| supported connection types | RTU (RS232, RS485), TCP |
| Custom registers | MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality |
| supported data formats | 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
| Modbus MQTT Gateway | Allows sending commands and receiving data from MODBUS Server through MQTT broker |
| Serial RS232 | Terminal block connector: TX, RX, RTS, CTS |
| RS485 | Terminal block connector: D+, D-, R+, R- (2 or 4 wire interface) |
| Input | 3 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high |
| Output | 3 x Digital Output, Open collector output, max output 30 V, 300 mA |
| Power Connector | 2-pin in 16-pin industrial terminal block |
| Input voltage range | 9 - 30 VDC, Overvoltage protection, Reverse polarity protection, Surge protection +/- 1kV 50 uS Max |
| Power consumption | Idle: < 2 W, Max: < 3.5 W |
| I/O’s | 3 x Configurable I/O, 1 x Analog input in 16-pin terminal block |
| Status LEDs | 1 x Power, 2x GNSS status LEDs, 1x NTP Server status LED, 3 x IO status LEDs |
| Power | 1 x 16-pin terminal block |
| Antennas | 1 x SMA for GNSS |
| Casing material | Anodized aluminum housing and panels |
| Dimensions (W x H x D) | 82.6 x 25 x 83 mm |
| Weight | 180 g |
| Mounting options | DIN rail, wall mount, flat surface (all require additional kit) |
| Operating temperature | -40 °C to 75 °C |
| Operating humidity | 10% to 90% non-condensing |
| Ingress Protection Rating | IP30 |
| Regulatory | CE, UKCA, CB, UCRF, EAC, WEEE |
| Details | |
|---|---|
| Included | NTP001 GNSS NTP Time Server, 16-pin terminal block, QSG (Quick Start Guide) |
| Power Supply | Not Included |
Share
Subscribe to our newsletters
Be the first to know about new products and receive exclusive offers.