1 1

PoE World

PoE World Gigabit Ethernet 802.3at to 12VDC 25 Watt Output for Non-PoE Devices

PoE World Gigabit Ethernet 802.3at to 12VDC 25 Watt Output for Non-PoE Devices

GAT-12v25w

$40.00 NZD
$40.00 NZD
Sale Sold out
Shipping calculated at checkout.

* All prices exclude GST & Freight, Calculated at checkout - supply only*

In stock
PoE World Gigabit Ethernet 802.3at to 12 VDC 25 Watt Output for Non-PoE Devices - GAT-12v25w
PoE World Gigabit Ethernet 802.3at to 12VDC 25 Watt Output for Non-PoE Devices - GAT-12v25w

This device works with any 802.3at switch, it takes the 44 to 56 volts from the PoE switch, and converts that voltage to 12 volts and removes power from the data - it works with gigabit data speeds. Can also work with an 802.3af switch if the output is used below 13 watts.

This PoE solution appears like a standard Class 4, 25 watt device. The PoE switch can send either polarity, and only 2 pairs are required for power, 4 pairs for gigabit data, 2 pairs for 10/100. The output is fully isolated from the input voltage. Grounding is of no concern. The output power is on a 2.1mm DC connector.
Features
  • Great for remote powering non PoE 12V IT equipment.
Details
Product Code GAT-12v25w
Input Ethernet 10/100/1000 mb/s
Output Ethernet 10/100/1000 mb/s
Input Voltage 802.3af / 802.3at / passive 44 to 57 volts at 570 mA max
Output Voltage 12 volts +- 2% at 2.08 amps, 25 watts
Internal power use 350 mw ( keep alive 802.3af)
Operating Temperature 0°C - 50°C
Data Transparent
Isolation 1500 Volts
Size 107 x 50 x 25 mm
802.3at Class 4
PoE Power input Pins 1&2 and 3&6 – either polarity – mode A, 4&5 + and 7&8 minus – mode B, Shielded RJ45
Data output Shielded RJ45
Power out DC connector 2.1 mm x 5.5mm female connector
LED status on Female RJ45 Right - Power In active = Green, Left - Power out active = Amber
Details
View full details