Milesight UC501 Solar Powered Cellular (NB-IoT/CAT-M1) IoT Controller with GPIO/AI/RS232/RS485

Milesight UC501 Solar Powered Cellular (NB-IoT/CATM1) IoT Controller with GPIO/AI/RS232/RS485 The Milesight UC501 is a Cellular based IoT controller used for data acquisition from multiple sensors. It contains different I/O interfaces such as analog inputs, digital inputs, digital outputs, serial ports and so on, which simplify the deployment and replacement of existing sensor networks.. For outdoor applications, it provides solar power supply and is equipped with an IP68-rated enclosure and M12 connectors to protect itself from water and dust in harsh environments..... Features Easy to connect with multiple wired sensors through GPIO/AI/RS232/RS485 interfaces Long transmission distance up to 11km with line of sight Waterproof design including IP67 case and M12 connectors Solar powered with rechargable Quick wireless configuration via NFC Details Manufacturer's Code UC501-N03GL Cellular Bands Cat M1: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B27/B28/B66/B85,Cat NB2: B1/B2/B3/B4/B5/B8/ B12/B13/B18/B19/B20/B25/B28/B66/B71/B85 SIM Slot 1 x Nano SIM 4FF Application Mode TCP/UDP/MQTT/AWS Sensitivity - Interface type M12 A-Coded Male IO Ports 2 x GPIO Logic Level Low: 0~0.9V, High: 2.5~3.3V Work Mode Digital input, digital output, pulse counter (only support on GPIO2) Serial Port 1 × RS232 or RS485 (Switchable) Baud Rate 300~230400 bps Protocol Transparent (RS232), Modbus RTU (RS485) Analog Inputs 2 × Analog input Resolution 12 bit Input Range 4~20mA or 0~10V (Switchable) SDI-12 Ports 1 × SDI-12 Protocol SDI-12 V1.4, Transparent Power Output 2 × 3.3 V, 2 × 5/9/12 V (Switchable) Operating Temperature - Ingress Protection IP68 Dimension 116 × 116 × 45.5 mm (4.56 × 4.56 × 1.79 in) (Connectors Excluded) Power Connector M12 A-Coded Male Power Input Rechargeable 4900 mAh battery with solar panel Power Supply Solar powered + 2*2550mAh battery backup + 5-24 VDC Power On & Off Cellular Version: Mobile App (via NFC), Power Button (Internal) Configuration Cellular Version: Mobile App (via NFC) Mounting Wall or Pole Mounting Firmware & Datasheets and User Guides Blog Wiki Knowledge Base Case Studies IoT Academy Details Included 2 × Data Cable, 1 × USB Cable, Mounting screws, Screwcaps, Warranty Card

Key features

• 147dBm @300bps
• 20°C to +60°C
• The UC501 can be easily and quickly configured by NFC
• This sensor is perfect for multiple use cases including smart agriculture, smart industrial monitoring and smart cities
• You can use this unit for retro-fitting existing sensors to send over Cellular, including gas, water or flow meter monitoring